Sno-Way goes electric
For those who are tired of having their spreader run out of gas, there's the 6-foot Electric V Box from Sno-Way.
This low-profile spreader is 6 feet long, 26" high, and 38" wide. Offered in a mild or stainless steel, the 6-ft V Box can be used to spread sand, salt, or a combination and holds 0.75 cubic yards. Sno-Way's swing-away chute design facilitates unloading and access to the trailer hitch, and it provides a simple storage system.
This spreader has an electric motor that operates quietly. Sno-Way also includes a hand-held electronic cable controller with every 6-ft V Box spreader.
For complete details, contact Sno-Way, 1353 Wacker Dr, Hartford WI 53027.
Circle #200 on Reader Service Card
Flap-Seal joins Trim-Lok line
Trim-Lok Inc stocks a line of extruded PVC vinyl and EPDM/Neoprene rubber trims and seals for finishing, protecting, and sealing applications.
The company introduces Flap Seal, a flexible PVC Trim with an EPDM sponge rubber flap. Flap Seal provides a secure seal in various dynamic applications and seals tightly to protect against weather damage. Flap Seal comes in a variety of sizes.
For a free catalog, samples, or more information, contact Trim-Lok, 6855 Hermosa Circle, Buena Park CA 90622-6180.
Circle #201 on Reader Service Card
Arrow Safety Device adds five new strobes to line
Five new strobes have been added to Arrow Safety Device Co's strobe line. They range in size and features from a 7"-high permanent-mount model down to a 4"-high magnetic-mount with cigarette lighter adapter. The 560-00 Series has some of the latest features such as a photocell, which will automatically reduce the flash output at night or other times/areas of low light.
As with most strobes, the circuitry is potted for increased weather and shock resistance. All strobes are available in a choice of amber, red, blue, and clear lenses, and all the new strobes feature Quad Flash. Lenses and bases for all models are made of polycarbonate.
For more information, contact Arrow, PO Box 159, Mount Holly NJ 08060-0159.
Circle #202 on Reader Service Card
American Roll-off offers high-dump hook lift
American Roll-off, manufacturer of Hook-All hook lifts, has introduced its first high-dump hook lift. The new 17,500-lb-capacity dual-pivot unit is designed for use on a 25,900-lb GVW non-CDL chassis and dumps like a true dump truck. Hook-All is a quick-change body system that allows the user to switch bodies and increase truck utilization and versatility.
Hook-all hook lifts take less than 30 seconds to switch bodies such as dump bodies, salt spreaders, or flatbeds. Hook lift bodies are also easy to load and unload since the user can offload the body and unload it from the ground.
The new Hook-All Model HA-175 uses dual-lift cylinders and operates at 2,800 psi, which makes it easy to match to an end user's hydraulic accessories.
For additional information, contact Automated Waste Equipment Co, PO Box 5757, Trenton NJ 08638.
Circle #203 on Reader Service Card
Smoothwheel: light weight, looks great
Smoothwheel's new lightweight aluminum wheel is designed to please the weight-conscious fleet manager and the driver who takes pride in his rig's look.
The 51-lb wheel has no hand holes for a distinct appearance. Smoothwheel's 22.5" × 8.25" lightweight aluminum wheel is available for standard hub-mount applications in outside and inside polished finish. Both versions have only one hole for valve stem access. In dual application, the inside polished wheel can be mounted in the outer position with any hand-holed steel or aluminum wheel mounted on the inner position. This allows for upgrading a truck and trailer by replacing only 10 wheels.
Smoothwheels are manufactured by Accuride, which warrants these products to be free from defects in workmanship and materials — excluding finish — for a period of five years from date of manufacture. For more information, contact Smoothwheel, 6678 Supply Way, Boise ID 83716-5512.
Circle #204 on Reader Service Card
Superwinch maximizes weight-to-pull ratio
Superwinch has introduced the ATV3000 DC-powered electric winch. Offering 3,000-lb pulling capacity, the ATV3000 weighs 14 pounds and provides a superior weight-to-pull ratio. The ATV3000 comes standard with “Power in and Power out,” energy-saving freewheel, 50 feet of wire rope, mechanical brake, and mounting hardware. Also standard are an enclosed weather-resistant rocker switch with numbered, color-coded wiring; single-stage, high-speed planetary gear set; and circuit breaker.
For more information, contact Superwinch, Winch Drive, Putnam CT 06260,
Circle #205 on Reader Service Card
RKI names marketing chief
Darrell J Audas, a 15-year employee of Houston TX-based RKI Inc, has taken the position of marketing director. Darrell has spent 14 years in the company's Engineering and Design Department as well as one year in the Estimating Department.
Hyundai Translead adds ITEC
Hyundai Translead has signed its newest dealership in North America, International Transport Equipment Corp (ITEC) of Abbotsford, British Columbia, Canada.
With locations offering sales, parts, and service facilities in Abbotsville; Edmonton, Alberta; and Winnipeg, Manitoba, ITEC is in a position to offer all of the Hyundai Translead trailer lines to the Canadian market.
Arrow appoints sales agent
Arrow Safety Device Co has named Mutual Marketing as its sales representative for Missouri, Iowa, Nebraska, and Kansas. The two principals in this agency are Mike Getso and Dave Hanson. Both recently worked for Ted Sibilsky Sales and are familiar with the Arrow line.
Volvo puts the brakes on vehicle instability
Volvo Trucks North America Inc will offer the ABS-6 antilock brake system made by Bendix Commercial Vehicle Systems LLC on the Volvo VN and Volvo VHD.Beginning in early 2005, Volvo will offer ABS-6 Advanced with ESP (Electronic Stability Program), to address a range of driving conditions. ABS-6 will be Volvo's standard antilock brake system in North America, while ABS-6 Advanced with ESP will be a customer-specified option.
ESP can apply the brakes selectively on individual wheel ends, depending on driving conditions, vehicle speed, and other inputs from onboard sensors. This assists the driver to reduce speed, keep the vehicle aligned, and reduce the tendency for the truck and trailer to slide or jackknife.
The Roll Stability Program (RSP) — an element of ESP — monitors inputs from sensors and applies all available brakes on a vehicle to reduce rollover potential while turning, a consideration for fleets operating high-center-of-gravity trucks.
The ABS-6 Advanced system overlays existing air brake system architecture and components with advanced sensors and electronic control units to achieve its advanced stability performance. This means technicians require minimal extra training to service the ABS-6. The system also has enhanced diagnostic and prognostic capabilities to assist technicians.
Volvo will offer the ABS-6 in three different configurations: with four wheel speed sensors and four brake modulators (known as 4S 4M), with six sensors and four modulators (6S 4M), and with six sensors and six modulators (6S 6M).
Buyers adds receiver-mounted tow hooks, eye
Buyers Products Co has added two receiver-mounted tow hooks and a receiver-mounted tow eye to its towing products line. These products are designed for convenient access and are suitable for occasional recovery jobs.
A 10,000-lb-capacity RM10H has a forged steel tow hook welded to a tubular shank. For heavy-duty applications, the 12,000-lb-capacity RM12H offers a one-piece solid forged tow hook with solid shank.
Buyers' new 12,000-lb-capacity tow eye, part number RM1225E, also features one-piece solid forged construction with a solid shank. The 2½" -ID eye is suitable for most applications.
Both hooks and the eye include a 5/8" hitch pin hole and are designed to fit any 2" hitch. All products are black powdercoated for durability and corrosion resistance.
For complete details, contact Buyers, 9049 Tyler Blvd, Mentor OH 44060.
Circle #206 on Reader Service Card
Holder protects license plates from elements
Flexi Co has introduced a holder to protect license plates from corrosion caused by weather, spray, and splash. Holders are newly developed from specially compounded SBR (styrene butadien rubber). They are designed to extend license plate life for up to 10 years.
The holders can be obtained as original equipment on new tractors, trailers, and connector dollies or as retrofits for existing units.
SBR is also used in the manufacture of Flexi record holders.
For more information, contact Flexi Co, PO Box 2011, Walnut Creek CA 94545.
Circle #207 on Reader Service Card
Grote Industries rounds out LED lamp line
Grote Industries introduces a full line of white SuperNova LED lamps that includes four dome lamps, single and dual system back-up lamps, two strobes, and a license lamp.
The four new dome lamps are: SuperNova LED surface-mount cab dome lamp (part #61621), SuperNova LED rectangular trailer dome lamp (part #61611), SuperNova LED 4"-diameter metal flange dome lamp (part #61141), and SuperNova LED 4" grommet-mount dome lamp (part #61581). These lamps will operate in temperatures as low as -40° F (-40°C). They're compatible with existing lighting systems and can be retrofitted in place of fluorescent or incandescent options.
The SuperNova LED single-system back-up lamp (part #62401) and dual-system back-up lamp (part #62391) not only outlast their incandescent counterparts, but they also use fewer LEDs than other models.
Grote offers a full line of LED strobe lamps, including two white LED strobes: the 4" round SuperNova LED strobe lamp (part #77351) and 60 Series SuperNova LED strobe lamp (part #77361). The LED strobes require no external power supply.
The patent-pending SuperNova LED license lamp (part #60381) is designed to allow water and dirt to pass behind and over the fixture without collecting and causing corrosion. Instead of lens optics, the light is directed by complex active reflectors inside the lamp. The lamp's low-profile design helps prevent damage from loading docks. For complete details, contact Grote, 2600 Lanier Dr, Madison IN 47250.
Circle #208 on Reader Service Card
Non-metal bumper sports ‘chrome’ finish
Hendrickson's new Aero Bright, a mirror-finish, non-metal bumper, delivers durability and high-impact resistance in a lightweight package. The company expects to have a full line of HAB bumpers available by 2004.
Aero Bright is a composition of formable, shiny, weatherable films and thick-sheet thermoforming technology.
Thermoforming starts with a flat rectangular sheet of plastic clamped to a frame and heated to a specific temperature. The sheet is then pulled tightly over a tool with a vacuum. After cooling, trimming completes the shaping.
To achieve strength and durability, special manufacturing techniques are used to retain the thickness of material when forming the HAB bumper. This technology may also be adapted to grilles, headlight bezels, and other components. Hendrickson holds exclusive rights to this weatherable film technology for the Class 5-8 commercial vehicle industry.
For complete details, phone Hendrickson at 800-356-6737.
Narrow-frame reel can handle dual-hose use
Hannay Reels' N600 series is suitable for applications requiring dual hose for separate materials such as gases and liquids or air and coolant. This narrow-frame, spring-rewind reel is designed to accommodate simultaneously equal lengths of two hoses that can be of different diameters.
The narrow frame and compact mounting base allow the N600 to fit into limited-space work environments. A non-sparking ratchet assembly locks the reel at the desired length of hose payout, and a pull on the hose unlocks the reel for the spring motor to retract it. A declutching arbor is included to prevent damage from reverse winding.
For additional information, contact Hannay, 553 State Route 143, Westerlo NY 12193-0159.
Circle #209 on Reader Service Card
Compact device measures oxygen volume
Draeger Safety Inc has introduced its microPac Plus oxygen monitor, an ultra-compact gas measuring and warning device for oxygen in the 0 to 25.0% volume range. This two-year maintenance-free instrument has a fully functional LCD concentration display with audible, visual, and vibrating alarms.
The lightweight, low-profile design allows the microPac Plus to be worn on the lapel, shirt pocket, or belt of those who require a warning of the presence of hazardous gas concentrations. Its RFI-protected housing guards against the environment, and the attention-getting alarms immediately notify the user of a potential gas hazard.
The microPac Plus oxygen monitor can measure worker exposure in the chemical, petrochemical, steel, mining, construction, transportation and agricultural industries. It provides two years of worry-free monitoring without calibration or battery replacement.
Contact Draeger, 101 Technology Dr, Pittsburgh PA 15275-1057 for full information.
Circle #210 on Reader Service Card
Clean Seal upgrades tape for better adhesion
Clean Seal Inc has upgraded to the latest 3M tape designed specifically for attachment of weatherstrips and seals.
The firm's conversion to new Acrylic Plus Tape ST 1200 from 3M Co has enabled it to improve plant efficiency via better adhesion to Clean Seal's rubber, according to Clean Seal.
The new tape has a faster rate of adhesion build of less than 24 hours, and is more stable with a variety of environmental conditions, paints, and materials. This new, low-density tape system conforms more readily to substrate irregularities.
Acrylic Plus Tape from 3M has a black foam core for superior bond line aesthetics, improving the look of Clean Seal's black weatherseals.
For more information, contact Clean Seal, 20900 W Ireland Rd, South Bend IN 46614.
Circle #211 on Reader Service Card